Eventuri carbon intake system for Audi C7 RS6 RS7 Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.

Performance increase: 15-19 HP
V-box measurement: reduced by 0.4 seconds

The Audi C7 RS6 / RS7 Eventuri inlet sets new standards for inlet design on this platform. It was designed to achieve two goals: 1) Turboinlet restriction. 2) Maintain low inlet temperatures. The first goal was achieved by equipping each turbo with a separate filter and venturi stack to reduce drag and allow the turbos to work more efficiently. The second goal was achieved by enclosing the filters in a carbon air box and feeding them with an additional air scoop behind the front grill. The engine compartment of the C7 RS6 / RS7 has multiple heat sources from different directions, so a simple configuration of open filters and shields would lead to higher IAT values. Our carbon airbox case is designed to maximize the use of the available volume and block all heat sources. The resulting performance improvements and aesthetics are industry leading for the C7 RS6 / RS7.

The Eventuri difference

The C7 RS6 / RS7 Eventuri system uses 2 Venturi stacks, which are attached to the filters and pass smoothly into the turbo tubes. These offer an aerodynamically efficient air flow path from the filters to the turbos. Not just another conical filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow throughout the tube, reducing the turbo's air resistance.

Including TÃœV certificate