Data Display BMW E9X

The new frames, manufactured by injection molding, are now available for this model.

Please tell us when placing your order the last 7 digits of the FIN (vehicle identification number).

The Data Display E9X includes:

• controller
• Display 3.2 inches incl. Frame
• 1x USB cable for updating
• Cable set for connection to the vehicle
• display cable
• 2x socket housing for rewinding the necessary cables to the vehicle
• Registration Key

ATTENTION: Please inform yourself if the DataDisplay is also compatible with your vehicle!

Optional External Oil Temperature Sensor for Diesel Vehicles:

On some diesel models of the E series, the oil temperature can also be displayed without a sensor.

We therefore recommend reordering the sensor if necessary (to find under spare parts) and to see first if this is necessary at all.

The functions / displays / options as a whole:

(Depending on the engine, the functions vary)

• Automatic / Manual brightness control
• Full graphic touch display with 65536 colors
• Boat image freely changeable
• OBD2 blocker function (only unlockable via freely selectable code!)
• Release diagnosis (OBD2) via the disabling function of the DataDisplay
• Color setup freely adjustable (from when eg oil temperature red, yellow and green is displayed)
• Torque adjustment (should the real value not correspond to that in the engine control)
• Read and clear motor fault memory
• Shift light adjustable (display via picture on the DataDisplay and / or indicator in the instrument cluster)
• Save / reset the maximum values
• Save and start with the last page
• Delete - R (F-series suppress the KAT warning)
• torque
• power
• Speed (adjustment via GPS So time measurements are very accurate)
• water temperature
• oil temperature
• Transmission temperature (on all vehicles with automatic or DKG - E-series and F-series!)
• battery voltage
• Boost pressure (actual value)
• Boost pressure (target value)
• Charge pressure actuator position (wastegate position)
• Charge air temperature (IAT)
• air mass
• firing angle
• Injection time
• lambda value
• rail pressure
• fuel pressure
• Exhaust gas temperature (calculated)
• Oil pressure (F-series or E-series with external sensor)
• DPF differential pressure
• Pressure before DPF
• Soot mass DPF
• Oil ash DPF
• Dangerous route since the last successful regeneration DPF
• Time measurements 0-100 (with switching time display with manual switching)
• Time measurements 100-200 (with switching time display with manual switching)
• Time measurements 1/4 Mile (including display of average acceleration) (with switching time display with manual switching)
• Time measurements 1/2 Mile (including display of average acceleration) (with switching time display with manual switching)
• Time measurements 1/8 Mile (including display of average acceleration) (with switching time display with manual switching)
• Freely selectable speed or time measurement.
• Lap time (display distance and time) (with switching time display with manual switching)
• G-force display
• Soundtuning switch ("banging / bubbling" - F-series function)
• Active sound design switch (engine sound from the speakers - F-series function)
• Exhaust door control
• Tacho needles knock out with ignition
• Optionally connectable sensors (oil temperature, oil pressure, exhaust gas temperature, ...)
• Dashboard with 8 freely selectable values (water and oil temperature fixed above)
• DSC / DTC switchable on request with the vehicle starting (E-series function)
• Relay control: 4 relays can be controlled with which you can control pumps, injections, etc.
• Compensated scaled maps for N54 engines (boost pressure> 1.5 bar)
• Switching the language and units (English, German, Italian, French, Dutch, on request other units like Bar-PSI, PS-KW, Lambda-AFR, ° C- ° F, etc ...)
• Save the last 4 times (all time measurements)
• Up to 4 freely selectable parameters to display in a run diagram
• Freely selectable values displayed as value and bar graph (Up to 3 pieces)
• Continuous development of functions and styles.